600UMB1520

10" x 14" x 5" 20 Gauge Stainless Steel One Compartment Undermount Sink

Features

Undermount design enables sleek installation for a seamless surface
Deep drawn 20 gauge type 304 stainless steel construction
3 1/2" drain opening
1 1/4" outside flange for convenient installation
Features 2" radius corners for ease of cleaning

Certifications

NSF Listed

This item has been certified by NSF International to meet applicable product standards on public safety, health, and / or the environment.

Equip your kitchen, prep area, or bar with this Regency 10" x 14" x 5" 20 gauge stainless steel one compartment undermount sink.

This sink features an undermount design. That means it is secured to the bottom of the countertop for a clean, professional, seamless installation. It's perfect for use in a front of the house bar area, or as an addition to a prep area where you need an extra handwashing, utility, or dump sink. The 1 1/4" outside flange makes installation fast and easy.

Durable and Easy to Clean

Designed for durability, corrosion-resistance, and sanitation this sink bowl is made of deep drawn 20 gauge, type 304 stainless steel. It features 2" radius corners that prevent grimy build-up and allow clean rinsing.

Ready for Installation

Plus, the 3 1/2" drain opening is ready for installation so you can get your new sink up and running. To get your sink up and running as quickly as possible, this unit comes with the required installation hardware.

Watch more videos

Regency Stainless Steel Gauge and Type Selections

The gauge and type of any stainless steel product can drastically change its use and application. Watch this video to learn more about Regency stainless steel!

Specifications

Length 12 1/2 Inches
Width 16 1/2 Inches
Height 5 Inches
Cutout Length 10 3/4 Inches
Cutout Width 14 3/4 Inches
Bowl Depth 5 Inches
Bowl Front to Back 14 Inches
Bowl Left to Right 10 Inches
Color Silver
Corner Radius 2 Inches
Drain Opening 3 1/2 Inches
Edge Style Flush
Features Massachusetts Accepted Plumbing Product
Features NSF Listed
Gauge 20 Gauge
Installation Type Undermount
Material Stainless Steel
Number of Compartments 1 Compartment
Stainless Steel Type Type 304
Type Undermount Sinks

Frequently Asked Questions

View all FAQs

If you're choosing a drop-in sink, this information should be provided in the specifications for the product. The cutout must be large enough to accommodate the sink bowl(s) but also not bigger than the lip of the sink, which overhangs the cutout and holds it in place.

If you're choosing an undermount sink, the sink will install underneath the counter, so your cutout size should be about the same as the total, combined dimensions of your sink bowl(s) for a clean look. Your countertop must also have a finished edge around the cutout, since top of the bowl installs below the cut, leaving it exposed.

We’re here to support you with your product

Visit Support Center

Compatible Products

View All Parts